6
6
7
8
ExacTemp® Stability Indicator light will pulse while temperature measurement is
in progress. The light will remain solid for 3 seconds to indicate that a
successful temperature reading has been achieved.
NOTE: If the probe has been properly inserted into the ear canal during the
measurement, a long beep will sound to signal the completed measurement.
If the probe has NOT been constantly placed in a stable position in the
ear canal, a sequence of short beeps will sound, the ExacTemp® Stability
Indicator light light will go out and the display will show an error message
(POS = position error).
See «Errors and troubleshooting» section for more information.
The conrmation beep indicates that an accurate temperature measurement has been taken.
The result is shown on the display.
0-3 3-36 36+
Months
0-3 3-36 36+
Months
0-3 3-36 36+
Months
For the next measurement, press Eject button to
remove, and discard used lens lter, and put on a new,
clean lens lter.
NOTE: Defaults to last age setting used if you do not
change.
The Braun ThermoScan Ear thermometer turns o
automatically after 60 seconds of inactivity.
The thermometer can also be turned o by
pressing and holding the Power button
.
The display will briey ash OFF and it will go blank.
Age range
Green
Normal temperature
Yellow
Fever
Red
High fever
0*-3 Months
≥96.4 – ≤99.4 °F
(≥35.8 – ≤37.4 °C)
>99.4 °F
(>37.4 °C)
3-36 Months
≥95.7 – ≤99.6 °F
(≥35.4 – ≤37.6 °C
>99.6 – ≤101.3 °F
(>37.6 – ≤38.5 °C)
>101.3 °F
(>38.5 °C)
36 Months -
adult
≥95.7 – ≤99.9 °F
(≥35.4 – ≤37.7 °C)
>99.9 – ≤103.0 °F
(>37.7 – ≤39.4 °C)
>103.0 °F
(>39.4 °C)
* 0 months is dened as having a gestational age of greater than or equal to 37 calendar weeks at birth.
Fully insert the probe into the ear canal
and point straight towards the
opposite ear or temple.
Once positioned correctly, press and
release the start button
.
5
To Next Page
Loading...
Need help?
General
