Braven 650 - BRAVEN Features and Usage; External Device Charging

EXTERNAL CHARGING
BRAVEN is designed to charge USB devices that draw
from 0.3A - 1 A
(most cell phones & mp3 players. Tablets and
other 2A devices cannot be charged by your BRA VEN speaker)
using the full-sized USB port on the left side of the
speaker.
To use external charging:
1. Turn the BRAVEN
power switch on.
2. Plug the USB power cable that came with your
phone,
mp3 player, or other mobile device into the
USB port on the BRAVEN speaker.
3. Plug the other end
of the cable into your mobile
device, and it will immediately begin charging.
APPROXIMATE CHARGING CAPACITY
On a full charge, without music playing, your
BRAVEN speaker can charge external devices to
the following approximate levels:
BRAVEN 650- will charge a typical smartphone
approximately 80-1 00%
(depending on model and
battery size)
BRAVEN 625s- will charge a typical
smartphone approximately 70-90%
(depending on
model and battery size)
BRAVEN 600 - will charge a typical smartphone
approximately 50-70%
(depending on model and battery
size)
BRAVEn