ENGLISH | 4
CHARGING EXTERNAL DEVICES
SPEAKERPHONE
Your BRAVEN is designed to charge USB devices that draw from 0.3A - 1A using the full-sized USB port located
behind the I/O port cover. To use external charging:
1. Turn your BRAVEN on.
2. Plug the Micro USB power cable that came with your phone, mp3 player,
or other mobile device into the USB port on your BRAVEN.
3. Plug the other end of the cable into your mobile device, and it will immediately begin charging.
Press the Mic button button on your BRAVEN to answer the call over the speaker. Press the Play / Pause Mic
button again to end the call.
WATERPROOF FEATURES
The BRAVEN READY SOLO
™
is IP68 waterproof, and is designed to withstand rainfall, waterjets, water
splashing, or a dunk in the pool.
IMPORTANT: To ensure your BRAVEN READY SOLO
™
speaker is prepared for use in a wet environment, remove
all cable connections and tightly close the I/O port cover on the back of the speaker. If this cover is not
securely fastened to the speaker, BRAVEN READY SOLO
™
will not be waterproof.
USING BRAVEN VOICE CONTROL
To activate Siri or Google Commands with your BRAVEN, short press the Mic button. You can now say commands
through your BRAVEN, with your phone at a distance.
To Next Page
