Need help?Do you have a question about the Bray 6P Series and is the answer not in the manual?
General| Operating Temperature | -40°F to 180°F (-40°C to 82°C) |
|---|---|
| Air Supply Pressure | 1.4 to 7 bar (20 to 100 psi) |
| Material | Aluminum |
| Enclosure Rating | IP66, NEMA 4X |
| Ambient Temperature Range | -40°F to 180°F (-40°C to 82°C) |
| Certifications | ATEX, IECEx, FM, CSA |
| Air Consumption | 4.5 l/min (0.16 scfm) at supply pressure of 1.4 bar (20 psi) |
Step-by-step instructions and safety precautions for installing the positioner.
Provides guidance on connecting supply and signal air lines to the positioner.
Procedure for setting the full stroke range of the positioner.
Procedure for setting the starting point (3 psi) of the positioner's stroke.
Provides solutions for common operational problems and error states.
Steps to diagnose and resolve issues where the positioner does not respond to the input signal.
Troubleshooting steps when OUT 1 pressure exhausts and does not recover.
To Next Page
