Bray 70 Series Operation And Maintenance Manual

BRAY Series 70 Electric Actuator
Operation and Maintenance Manual
2
1.1 Hazard-free use
This device left the factory in proper condition to be safely
installed and operated in a hazard-free manner. The notes
and warnings in this document must be obeserved by the
user if this safe condition is to be maintained and hazard-
free operation of the device assured.
Take all necessary precautions to prevent damage to the
actuator due to rough handling, impact, or improper storage.
Do not use abrasive compounds to clean the actuator, or
scrape metal surfaces with any objects.
The control systems in which the actuator is installed must have
proper safeguards to prevent injury to personnel, or damage
to equipment, should failure of system components occur.
1.2 Qualified PersOnnel
A qualied person in terms of this document is one who is
familiar with the installation, commissioning and operation of
the device and who has appropriate qualications, such as:
• Is trained in the operation and maintenance of electric
equipment and systems in accordance with established
safety practices
• Is trained or authorized to energize, de-energize,
ground, tag and lock electrical circuits and equipment
in accordance with established safety practices
• Is trained in the proper use and care of personal
protective equipment (PPE) in accordance with
established safety practices
• Is trained in rst aid
• In cases where the device is installed in a potentially
explosive (hazardous) location – is trained in the
operation, commissioning, operation and maintenance
of equipment in hazardous locations
WARNING
The actuator must only be installed, commissioned,
operated and repaired by qualied personnel.
The device generates large mechanical force during
normal operation.
All installation, commissioning, operation and maintenance
must be performed under strict observation of all applicable
codes, standards and safety regulations.
Reference is specically made here to observe all
applicable safety regualtions for actuators installed in
potentially explosive (hazardous) locations.
safeTy insTruCTiOns - definiTiOn Of Terms
read and fOllOW THese insTruCTiOns
saVe THese insTruCTiOns
WARNING
indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION
indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injury.
NOTICE
used without the safety alert symbol indicates a potential situation which, if not
avoided, may result in an undesirable result or state, including property damage.
!
!
!
!

Bray 70 Series Specifications

General

Brand	Bray
Model	70 Series
Category	Controller
Language	English