MBS Series User Instructions 3
Brecknell is part of Avery Weigh-Tronix. Avery Weigh-Tronix is a trademark of the Illinois
Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc
(“Illinois Tool Works”). Copyright © 2016 Illinois Tool Works. All rights reserved.
No part of this publication may be reproduced by making a facsimile copy, by the making of a
copy in three dimensions of a two-dimensional work and the making of a copy in two dimensions
of a three-dimensional work, stored in any medium by electronic means, or transmitted in any
form or by any means, including electronic, mechanical, broadcasting, recording or otherwise
without the prior written consent of the copyright owner, under licence, or as permitted by law.
This publication was correct at the time of going to print, however Avery Weigh-Tronix reserves
the right to alter without notice the specification, design, price or conditions of supply of any
product or service at any time.
Declaration of Conformity
Manufacturer
Type
Salter Brecknell
MBS
Corresponds to the requirements of the following EC directives:-
Electro Magnetic Compatibility
Low Voltage Directive:
EMC 89/336/EEC
LVD 2006/95/EC
The application harmonised
standards are:
EN60950-1: 2002, EN61000-6-3: 2001
EN61000-6-1:2007
To Next Page
Loading...
