Brecknell MS-1000 - Hold Function with Automatic Zero on Next Weigh; Hold Function with Manual Release; Removing Hold; Print Function



Hold function with automatic zero on next weigh.
1.
Hold
Print
Hold
2.
3.
4.
Hol d
Hold function with manual release.
This function needs to be setup in Parameter P3.1 shown on page 10
1.
Hold
Print
Hol d
2.
3.
Removing Hold
Hold
Print
Hol d
Print Function
For communications to a printer or PC, the indicator has to be setup in the following parameters P2, P4, P5 and
P6.



