2
ank you for purchasing the Breckwell Pellet Burning Stove, you are now prepared to burn wood in the most
e cient, convenient way possible. To achieve the safest, most e cient and most enjoyable performance from
your stove, you must do three things: 1) Install it properly; 2) Operate it correctly; and 3) Maintain it regularly.
e purpose of this manual is to help you do all three.
PLEASE read this entire manual before installation and use of this pellet fuel-burning room heater. Failure
to follow these instructions could result in property damage, bodily injury or even death.
Keep this manual handy for future reference.
is stove has been independently tested to ASTM E1509-12 Standard Speci cation for Room Heaters, Pellet
Fuel Burning Type 1, ULC-S627 Standard for Solid Fuel Room Heaters, and Oregon Administrative Rules for
Mobile Homes (814-23-900 through 814-23-909) and Installation as a Stove Heater.
is pellet stove, when installed, must be electrically grounded in accordance with local codes, or in the absence
of local codes, with the National Electrical Code, ANSI/NFPA 70. e authority having jurisdiction (such as
municipal building department, re department, re prevention bureau, etc.) should be consulted before instal-
lation to determine the need to obtain a permit.
is appliance is designed speci cally for use only with pelletized wood. It is designed for residential installa-
tion according to current national and local building codes as a freestanding room heater. It is also approved as
a mobile home heater which is designed for connection to an outside combustion air source. e stove will not
operate using natural dra or without a power source for the blower systems and fuel feed system and must not
be burned with any type of coal (see PROPER FUEL).
is stove is designed to provide the optimum proportions of fuel and air to the re in order to burn free of
smoke and soot. Any blockage of the air supply to or from the stove will seriously degrade its performance and
will be evidenced by a smoking exhaust and a sooting window. For best operation the ash content of the pellet
fuel should be less than 1% and the calori c value approximately 8200 BTU/LB. Avoid high ash content fuels
because this will rapidly ll up the burn pot and eventually cut o the combustion air supply.
Commercial and industrial installations of Breckwell Pellet Stoves should not be used since
operational control is o en not well managed in these settings
IMPORTANT INFORMATION
Model: __SP24 or SP24I __________
Style: ____________________________
Serial Number:_____________________
Purchase Date: ____________________
Purchased From:___________________
___________________
___________________
MAIL YOUR WARRANTY CARD TODAY
To receive full warranty coverage, you will need
to show evidence of the date you purchased
your stove. We suggest that you attach your
sales invoice to this page, and fi ll in the form
on the left, so that you will have all the informa-
tion you need in one place should the need for
service or information occur.
is manual describes the installation and operation of the Breckwell, SP24 wood heater. is heater meets the
2015 U.S. Environmental Protection Agency's crib wood emission limits for wood heaters sold a er May 15,
2015. Under speci c test conditions this heater has been shown to deliver heat at rates ranging from 6,569 to
34,785 Btu/hr.
INTRODUCTION
To Next Page
Loading...
