Bredband2 Genexis Pulse EX600 User Manual

5
Genexis Pulse EX600 www.bredband2.com
LED colour
Green solid - Connected to the network
Green blinking – Connection lost
Yellow solid – The device starting up or WiFi is o
Yellow blinking – System is not ready
Blue solid – WPS-paring sussessful
Blue blinking – WPS-paring in progress
Red – System booting failure, contact Bredband2
O – Power o
Mode buon
WPS pairing – press the buon and release after 1 second.
WiFi ON – press and hold the buon until the Status LED starts
blinking or is solid green.
WiFi OFF – press and hold the buon until the Status LED turns
solid yellow.
LAN ports
WAN port
Reset buon
Power port
ON/OFF switch

Bredband2 Genexis Pulse EX600 Specifications

General

Brand	Bredband2
Model	Genexis Pulse EX600
Category	Network Router
Language	English