BREIL TRIBE - Multifunction Models; Setting the Day

USER’S MANUAL 18
1. Pull the crown (C) out completely. The second hand will stop immediately.
2. Turn the crown clockwise to set the hour (1) and minute (2) hands in the desired
position. The day of the week hand (12) moves in synch with the hour hand; check that
this latter has arrived on the desired day.
3. Return the crown to its normal position (0).
Note: rotating the crown counterclockwise will not turn back the day of the week hand.
SETTING THE TIME
MULTIFUNCTION MODELS
SUNON PE802 TMI VD31
1
2
3
8
4 4
C
A
B
Before setting the date, make sure you have set the time.
1. Pull the crown (C) out to the first click (1a).
2. Turn the crown clockwise to adjust the date.
3. Return the crown to the normal position (0).
Note: rotating the crown counterclockwise will not turn back the day of the week hand.
SETTING THE DATE
1. Pull the crown out to the 2nd Click Position.
2. Turn the crown clockwise to set the day.
3. After the day has been set, push the crown back to the Normal Position.
*The day is changed during the period from 0AM to 5AM.
SETTING THE DAY
12
8
A
B
13
4
MIYOTA JP25