BREIL TRIBE - Chronograph Operations; Measuring Accumulated Time; Measuring Split Time; Resetting the Chronograph

USER’S MANUAL 21
Press the button in the following order:
Start: Button A
Stop: Button A
Reboot: Button A
Stop: Button A
Reset: Button B
Operations from 1 to 4 can be repeated endlessly.
Press the button in the following order:
Start: Button A
Measuring split time: Button B
Reboot split time: Button B
Stop: Button A
Reset: Button B
Operations from 1 to 3 can be repeated endlessly.
MEASURING ACCUMULATED TIME
MEASURING SPLIT TIME
RESETTING THE CHRONOGRAPH
If, after pressing pushbutton B, the hands of the chronograph do not return to position 0,
proceed as described below:
1. Pull crown (C) fully out and press pushbutton A or B to reset the minute (2) and second
(3) hands of chronograph. Each time pushbuttun A or B is pressed, the hands move one
second back or forwards, respectively.
2. If the hands of the chronograph do not move smoothly, press and hold down push button
A and B at same time for more than two seconds.
3. After released them, the second hand of the chronograph will turn 360 anticlockwise and
will return to its initial position, thus indicating that the integrated circuit has been restored
to its normal operation.