Breitling Aerospace Evo - Special Characteristics; Aviation Weight and Measure Conversion Scale

46
Remember to take into account the watch’s time mode (2x12H or 24H) when
selecting and displaying a second timezone (see 2.1).
3.3 USING THE CHRONOGRAPH
Select the CHR (chronograph) function.
Press on the crown to start the chronograph.
Press the crown again to stop the chronograph.
A further press on the crown will restart the chronograph,
allowing a series of short times to be measured and added
together.
ME Aerospace Evo 16.04.13 11:54 Page46
C064 Aerospace Evo - Breitling - 264p_2rbt_Breitling - FB 003 - Verso - 3
C064 Aerospace Evo - Breitling - 264p_2rbt_Breitling - FB 003 - Verso - 3
Data sortie: 14.01.2015 - 08:35:09 - BlackData sortie: 14.01.2015 - 08:35:09 - Magenta
C064 Aerospace Evo - Breitling - 264p_2rbt_Breitling - FB 003 - Verso - 3
Plate Control Strip
© Heidelberger Druckmaschinen AG 2013
V15.0i (pdf)
Topsetter
Agfa
Azura TS
4/22
0.5 P
Times
1 P
Times
2 P
Times
4 P
Times
Times
4P
Times
2P
Times
1P
Times
0.5P
0/100% 1% 2% 3% 5% 10% 20% 25% 30% 40% 50% 60% 70% 75% 80% 90% 95% 97% 98% 99%
Lin+
Process
Return the chronograph to zero by pressing on the crown
for more than two seconds.
While the chronograph is in use, any other function of the watch can be se-
lected and used. However, the watch must be returned to the CHR
(chronograph) mode for stopping and reading chronograph times and re-
turning this function to zero.
The chronograph mechanism will stop automatically after 48 hours. Times
shorter than 1 hour are expressed in minutes, seconds and hundredths of a
second. Times longer than 1 hour are measured in hours, minutes and
seconds.
47
28 min. 35.10 sec. 14 hrs 18 min. 15 sec.
ME Aerospace Evo 16.04.13 11:54 Page47
C064 Aerospace Evo - Breitling - 264p_2rbt_Breitling - FB 003 - Verso - 3
C064 Aerospace Evo - Breitling - 264p_2rbt_Breitling - FB 003 - Verso - 3
Data sortie: 14.01.2015 - 08:35:09 - BlackData sortie: 14.01.2015 - 08:35:09 - Magenta
C064 Aerospace Evo - Breitling - 264p_2rbt_Breitling - FB 003 - Verso - 3
Plate Control Strip
© Heidelberger Druckmaschinen AG 2013
V15.0i (pdf)
Topsetter
Agfa
Azura TS
4/22
0.5 P
Times
1 P
Times
2 P
Times
4 P
Times
Times
4P
Times
2P
Times
1P
Times
0.5P
0/100% 1% 2% 3% 5% 10% 20% 25% 30% 40% 50% 60% 70% 75% 80% 90% 95% 97% 98% 99%
Lin+
Process