How to Use
1. Make sure that the battery has been fully charged.
2. You should always charge the battery with a reliable charging
adapter that comes with the Product.
Charging the Product
1. Plug the charging adapter’s DC plug into the charging terminal.
2. The LED indicator blinks while charged.
3. The Product will automatically stop while it is being charged.
4. It takes about 4 to 5 hours to charge the Product.
Wearing the Product
Insert the knob belt into N1. For proper treatment, you can adjust
the width using the width control knob. Pull up the silver-colored
semi-circle(marked “V”) in the center of the Product and then turn
it left or right for optimal adjustment. Place the relaxer onto the back
of your neck and properly position the relaxer while holding the both
knob ends.
Operation
If you long-press the Power ON/OFF button, the Product will be
activated while the LED indicator blinks in red.
The default operating time is 15 minutes, and the default mode
is Mode 1.
Preparations before Use
434
To Next Page
Loading...
