33
WiFi Router setup
ADVANCED
ProWeatherLive
Station ID:
Weather server setup
Station key:
Router:
Add Router
Search
Security type:
Router Password:
ROUTER_A
Language: English
Mac address 00:0E:C6:00:07:10
Point to :
Outdoor sensor direction
N
SETUP
SETTINGS
Apply
Firmware version: 1.00
SETUP page
Press to search router
Press "ADVANCED" icon to
advanced page
Select setup UI display language
Select WIFI/network (SSID) for
connection
Manually enter the SSID if not on list
Select router's security type
Device Mac address
Select the sensor located hemisphere
(e.g. US and EU countries are "N"
Australia is "S")
Press to complete the WI-FI related
setting
Enter station ID and
key assigned by the
ProWeatherLive (PWL)
WIFI/Network password (leave blank if
the security type is "Open")
Current rmware
version
Press to allow add
router manually
PWL2345678
12233
WPA2
NOTE:
- If you don't have station ID and station key available for the upload, you need to rst create an account at
ProWeatherLive (PWL), followed by registering the product to obtain the ID and key. For details, please
refer to "Create PWL account and add new device in PWL" in section 5.
- When WI-FI setup is completed, your PC/Mac or smart phone will resume its default WI-FI connection.
- During AP mode, you can press and hold the [ SENSOR / WI-FI ] key for 6 seconds to stop AP mode and
the console will restore your previous setting.
- Changing the hemisphere setting will automatically switch the direction of the moon phase on the display.
To Next Page
Loading...
Need help?
General
