To Next PageTo Next PageWhat to do if the grinder is making a loud ‘ratchet’ noise in my Breville Coffee Maker?
If the grinder in your Breville Coffee Maker is making a loud 'ratchet' noise, switch the grinder off immediately. There may be a blockage or foreign object in the grinder. Remove the hopper and clear any blockage in the chute. Remove the Upper Burr and clear the Lower Burr.
What to do if coffee extracts as drops from the portafilter of my Breville Barista Express BES860?
If coffee extracts as drops from the portafilter of your Breville Coffee Maker, the water tank may be empty or low. Also, the coffee grind might be too fine, or the machine could be blocked by mineral deposits. In this case, you should descale the machine.
Why is too much or too little ground coffee being delivered to the filter basket of my Breville Barista Express BES860 Coffee Maker?
If too much or too little ground coffee is being delivered to the filter basket of your Breville Coffee Maker, the grind amount settings might be incorrect for the particular grind size. Adjust the grind amount dial to increase or decrease the grind amount.
What to do if the grinder safety clutch has activated on my Breville Coffee Maker?
If the grinder safety clutch has activated on your Breville Coffee Maker, it's likely due to an overfilled filter basket causing the chute to backfill. Clean and clear the grinder and chamber.
General| Type | Espresso Machine |
|---|---|
| Model | BES860 |
| Color | Stainless Steel |
| Pump Pressure | 15 bar |
| Weight | 23 lbs |
| Built-in Grinder | Yes |
| Milk Frother | Yes |
| Power | 1600W |
| Voltage | 120V |
| Water Tank Capacity | 2.0 Liters |
| Bean Hopper Capacity | 0.5 lb (250g) |
| Dimensions | 13.5 x 12.5 x 15.5 inches |
| Warranty | 1 Year |
General advice and precautions for using the Breville appliance safely.
Essential safety guidelines for all electrical appliances to prevent hazards.
Overview of the main components and functions of the espresso machine.
Detailed identification of machine parts and accessories using diagrams and labels.
Steps for preparing the machine and conditioning the water filter before initial operation.
Guide to the initial startup process and recommended water flushing procedure.
Instructions for filling the water tank and adjusting the grind size for optimal extraction.
Steps for grinding coffee, adjusting dose, tamping, and pre-programmed shot volumes.
How to extract espresso, program shot volumes, and reset default settings.
Techniques for texturing milk and understanding the auto-purge function.
Importance of pre-heating cups, portafilter, and filter basket for optimal espresso quality.
Guidance on grind size for dual wall and single wall filters for balanced extraction.
Detailed steps for dosing, tamping, purging, and a guide to espresso extraction parameters.
Step-by-step methods for texturing milk for creamy and silky results.
Instructions for fitting and replacing the water filter to prevent scale buildup.
Procedures for cleaning the portafilter and the conical burr grinder.
How to perform the built-in cleaning cycle and decalcify the machine.
Recommended solutions and detailed steps for decalcifying the espresso machine.
Specific steps for cleaning the conical burr grinder and unblocking filters.
Maintenance for the steam wand, outer housing, cup warming plate, and drip tray.
Guidelines for safely storing the espresso machine when not in use.
Solutions for problems like no coffee flow or steam lights flashing during startup.
Addressing issues where coffee runs out too quickly or too slowly.
Addressing issues like cold coffee, no crema, or coffee running out around the filter holder.
Resolving problems with grinder operation, pulsing sounds, or blocked machine components.
Troubleshooting no steam generation or creamy milk after texturing.
Resolving issues with the grinder not starting or making loud noises, and machine not working.
Descriptions of various espresso-based drinks like Cappuccino, Latte, Macchiato, Long Black, Ristretto.
