Breville NESPRESSO PIXIE BEC430 - Troubleshooting Common Issues; Diagnosing and Resolving Problems; Product Specifications; Technical Details and Dimensions

11
EN
TROUBLESHOOTING
SPECIFICATIONS
No light.
➔ The machine has switched o automatically;
turn the machine on .
➔ Check the mains: plug, voltage, fuse.
No coee, no water.
➔ Check the water tank, if empty, ll with fresh potable water. Descale it if necessary.
➔ Lift the lever. Press one coee button and wait until water comes out.
Coee is not hot enough.
➔ Preheat cup. Descale the machine if necessary.
The lever cannot be closed completely.
➔ Empty the capsule container/Check that there is not a capsule blocked inside the machine.
Leakage or unusual coee ow.
➔ Check that the water tank is in position.
Lights ash irregularly.
➔ Call the Nespresso Club.
➔ Exit descaling procedure (see paragraph on descaling).
No coee, water just comes out
(despite inserted capsule).
➔ In case of diculties, call the Nespresso Club.
Machine switches itself o.
➔ To save energy the machine will turn itself o after 9 minutes of non use. See paragraph on «Energy
saving mode».
CONTACT THE NESPRESSO CLUB
For any additional information, in case of problems or simply to seek advise, call the Nespresso Club. Contact details of the Nespresso Club can be found in the «Welcome to Nespresso» folder in your machine
box or at nespresso.com
220-240 V, 50-60 Hz, <1260 W
max
19 bar
~ 3 kg
0.7 L
11.1 cm 23.5 cm 32.6 cm
UM_PIXIE_BREVILLE.indb 11 13.11.18 10:14