Breville Oracle User Manual

40
PROBLEM EASY SOLUTION WHAT TO DO
Coffee not
hot enough
•
Cups
not pre-heated.
•
Rinse cups under hot water outlet and place on
cup warming tray.
•
Milk
not hot enough
(if making a
cappuccino
or latté etc).
•
Increase the milk temperature. Refer to 'Adjusting
Milk Temperature', page 15.
No crema
•
Coffee
beans are stale.
•
Use freshly roasted coffee beans with a 'Roasted
On' date and consume between 5-20 days
after that date.
Not enough
milk texture
•
Steam
wand is blocked.
•
Refer to 'Cleaning the Steam Wand', page 33.
•
Different brands and types of milk and milk
alternatives will texture differently. You may need
to adjust the texture level accordingly. Refer to
'Adjusting Milk Texture', page 15.
Too much coffee
extracted
•
Coffee is ground
too coarsely.
•
Shot duration/
volume needs to be
reprogrammed.
•
Adjust the grind size to a lower number to make
the grind size slightly finer.
•
Reprogram the shot duration/volume. Refer to
'Programming Shot Volume/Duration',
page 18.
Not enough
coffee extracted
•
Coffee is
ground too finely.
•
Shot duration/
volume needs to be
reprogrammed.
•
Adjust the grind size to a higher number to make
the grind size slightly coarser.
•
Reprogram the shot duration/volume.
Refer to 'Programming Shot Volume/
Duration', page 18.
Amount of coffee
extracted has
changed, but all
settings are the same.
•
As coffee beans
age, the extraction
rate changes and
can affect the
shot volume.
•
Adjust the grind size to a lower number to make
the grind size slightly finer.
•
Reprogram the shot duration/volume. Refer to
'Programming Shot Volume/Duration',
page 18.
•
Use freshly roasted coffee beans with a 'Roasted
On' date and consume between 5-20 days
after that date.

Breville Oracle Specifications

General

Water Tank Capacity	84 oz
Pump Pressure	15 bar
Material	Stainless Steel
Bean Hopper Capacity	0.5 lb
Color	Stainless Steel