Loading And Unloading The Trailer
Bri-Mar 93
FFigure 5-3 - Install Ramps
• Load the equipment. The operator must be experienced and skilled
to perform the loading.
• Secure the cargo to the trailer using appropriate straps, chains and
tensioning devices. Refer to www.fmsca.dot.gov
for regulations
regarding cargo securement rules.
• Remove ramps and place in storage position. Be carefully not to
pinch fingers when sliding ramps in.
• Place ramp lock pins (1) as shown on each ramp to lock ramps in
• The tarp rail on trailers so equipped is to be used only to secure a
cover for any materials or equipment in transport.
storage position. See figure 5-4.
Trailers
To Next Page
Loading...