EasyManua.ls Logo

Briggs & Stratton 133200 Series - Starting and Stopping Engines; Electric Starter Engine Start Procedure; Electric Start Engine Stop Procedure

Briggs & Stratton 133200 Series
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
STARTING AND STOPPING
ELECTRIC (KEY) STARTER (if equipped)
TO START ENGINE
[1] Check oil level (see p. 7).
[2] Move throttle (if equipped) to FAST. Operate engine with throttle in FAST.
[3] Move choke control lever to CHOKE.
Throttle
OIL LEVEL
FULL
Choke
[4] Move stop lever (if
equipped) to ON.
[5] Insert key and turn to
START.
[6] Let engine warm up.
Choke Equipped: Move
choke control lever
toward RUN a short dis-
tance at a time over sev-
eral seconds in warm
weather or minutes in cold
weather. Let engine run
smoothly before each
change. Operate with
choke in RUN.
Stop
CAUTION: To prolong starter life, use short
starting cycles (5 seconds maximum, then wait
one minute). Follow equipment manufacturers
recommendations for charging battery.
TO STOP ENGINE
[1] Move throttle (if
equipped) to SLOW.
[2] Turn key to OFF. Remove
key and store out of reach
of children.
Throttle
[3] Move stop lever (if
equipped) to STOP/OFF.
Stop

Related product manuals