Briggs & Stratton Generator System User Manual

19
To remove roof:
1. Remove the five screws (A) that secure the roof to the
unit.
2. Carefully lift and remove roof from unit.
To remove front panel:
1. Remove the two screws (B) that secure the panel to the
unit.
2. Lift and flex panel outward and off base. Use caution
not to damage the battery box (C).
To secure front panel:
1. Place panel in unit.
2. Secure the panel with two screws.
A
B
C

Briggs & Stratton Generator System Specifications

General

Brand	Briggs & Stratton
Model	Generator System
Category	Inverter
Language	English