Step 3 – Set Up the Light Strings
There are 48 included installation clips. Space accordingly based on the size of your canopy. To
attach the clips, slip the edge of the canopy fabric into the long, narrow side of the clip.
Then insert the light string into the short narrow end of the clip. Continue this around the edges of
your canopy until reaching the starting point. Trim excess as needed.
Canopy Brightz can be cut to size to fit a canopy perfectly up to 10’ x 10’.
Brightz, Ltd.
8000 Yankee Road, Suite 225, Ottawa Lake, MI 49267
Email: info@brightz-ltd.com
Visit us at www.brightz-ltd.com for more fun products!
For the
fabric
For the
string
To Previous Page
Loading...
