Brightz tossbrightz User Manual

LATCHES
TOSS BOARD
OPENING
TOSS BOARD
SIDE
6x
6x
38x
4x
2x
2x
2x
2x
STEP 1 – Install Batteries (3 AA)
Open latches on the side of the battery pack to access or insert batteries.
STEP 2 – Install Battery Pack
A.
Using 2 screws, attach the clip plate
to either left, right, or top side of
board closest to the opening.
See STEP 4 for possible positions.
CONTENTS:
WARNINGS:
Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc)
or rechargeable (nicad, ni-mh, etc.) batteries.
Caution: Batteries may explode or leak, and cause burn injury if recharged, disposed of
in fire, mixed with a different battery type, or inserted backwards. Replace all used
batteries at the same time. Clean battery contacts and contacts on the device prior to
installing. Remove batteries if item will not be used for long periods of time. When
battery expires remove promptly.
CHOKING HAZARD
Small parts. Not for children 3 years of age or under.
support@brightz.com
419 . 517. 0049
tossbrightz
™
INSTRUCTIONS

Brightz tossbrightz Specifications

General

Model	TossBrightz
Category	Lighting Equipment
Power Source	Battery
Material	Plastic
Batteries Included	Yes
Usage	Outdoor
Features	Water-resistant
Runtime	8 Hours
Color Options	Multi-color

Summary

General Safety Warnings

Battery Handling Precautions

Details on mixing batteries, recharging, disposal, and cleaning contacts.

Choking Hazard Warning

Alert regarding small parts unsuitable for children under 3.

Install Batteries

Install Battery Pack

Attach Clip Plate

Secure the clip plate to the board using two screws.

Snap Battery Pack

Connect the battery pack to the clip plate.

Install Lights Around Tossboard Opening

Install Lights Outside Board