Step 10
Remove M6 X 12 mm bolt from left
side of control panel. Attach the
side table assembly to the left side
of firebox. Place table over bolts
and slide toward back of grill, then
tighten securely. Attach left side
table front panel to grill body using
the removed M6 X 12 mm bolt.
Step 11
Remove M6 X 12 mm bolt from
right side of control panel. Attach
the side burner assembly to the
right side firebox. Place side burner
assembly over bolts and slide
toward back of grill, then tighten
securely. Attach side burner front
panel to grill body using the
removed M6 X 12 mm bolt .
26
To Next Page
Loading...
