24
Note: With the help of a friend,
turn the cart to its upright
position.
Step 6
Unscrew the pre-attached bolts
from the tank retention bracket.
Attach tank retention bracket in
between right front and rear cart
legs using the two pre-attached
bolts as illustrated. Attach the tank
brace by inserting the carriage bolt
through the keyhole, slide down and
then use the wing nut to secure.
Note:
When performing Step 7,
lift grill body from front and
rear panels to avoid injury to
hands and fingers.
Step 7
With the help of a friend, place grill
body assembly on cart assembly
as illustrated. Attach using eight
M6 X 12 mm bolts as illustrated
below.
Wing Nut
Tank Retention
Support Bracket
Carriage Bolt
Bolts
Tank Retention
Bracket
Hood & Firebox
Assembly
Cart Front End
Cart Back End
To Next Page
Loading...
