ASSEMBLY STEPS
Step 1
Open grill hood and remove
cooking grills. Refer to your
Pro Series owners manual.
Step 2
Press the wooden handle
onto the end of the right
hand spit rod without the
threaded section.
Step 3
Connect the left and right
hand ends of the spit rod.
Tighten securely.
Step 4
Attach the motor mount
bracket on the left hand
side of the grill using 2
screws and 2 nuts.
Step 5
Attach the spit rod support
bracket to the right hand
side of the grill using 2
screws and 2 nuts.
3
wooden handle
assembled
left hand
spit rod
right hand
spit rod
wooden
handle
To Next Page
Loading...
