8
Charging your Beardscape
• Plug the USB style charger into the transformer and plug into
the wall.
• The charging plug can either be connected directly to the bottom
of the Beardscape or plugged into the charging cradle.
• If you are using the charging cradle, plug it in and set the
Beardscape in, bottom first as shown.
• Make sure the charging light on the LCD screen turns on.
• A complete charge may take up to 3 hours.
• The Beardscape will beep and automatically stop charging when
the battery is full.
• If the battery is low, the Beardscape can still be used while plugged
directly into the wall.
Getting Started
To Next Page
Loading...
