EasyManua.ls Logo

BRIO Beardscape - Best Practices for Li-Ion Batteries

BRIO Beardscape
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Getting Started |
The display will show differing amounts of battery time remaining
based on the speed setting of the trimmer. The table below shows
how long a fully charged battery will last based on the speed
settings.
RPM Compared to Expected Life
5000 RPM – 240 min 5500 RPM – 225 min
6000 RPM – 210 min 6500 RPM – 195 min
7000 RPM – 180 min
Best Practice for Optimal Battery Life
• Don’t let your Beardscape get to hot or too cold.
• Make sure you fully charge the BeardScape before using.
• It is best to cycle the battery - let the battery run down a little
before re-charging - it is not necessary to re-charge aer each use.
• It is best to charge the battery when the capacity less than 20% or
when the display shows less than 36 min.

Related product manuals