13
LCD Screen Functions |
RPM - Speed Control
The Beardscape operates at an RPM range of 5,000-7,000 revolu-
tions per minute. Use the (- +) button to change the speed settings.
The high torque motor is designed to
maintain the speed setting even when cutting thick or course hair.
Available Time
The time display shows the amount of cutting
time remaining in the charge. As the speed
(RPM) is lowered, cutting time increases.
Oil Prompts
Every 60 minutes of operating time the
Beardscape will signal that it is time to oil the
blade by flashing the oiling light and making a
beep tone. When the oil prompts go off, please
clean and oil your trimmer blade.
Oil Blade
To Next Page
Loading...
