3. Specification
Operating pressure range (bar) Min. Max.
Basin Mixer - J BAS C & J BASNW C 0.2 5.0
Eco Click Basin Mixer - J EBAS C 0.2 5.0
Mini Basin Mixer – J SMBAS C 0.2 5.0
Miniature Basin Mixer – J MBAS C 0.3 5.0
Maximum static pressure – 10.0 bar
NOTE:- Nominally equal (balanced) inlet supply pressures are recommended for optimum performance.
Designed to comply with BS EN 200 for single taps / combination taps for water systems of type 1 and 2 general
technical specifications and to be used within systems designed to BS 6700.
BS 6700 recommends the temperature of stored water should never exceed 65°C. A stored water temperature of
60°C is considered sufficient to meet all nominal requirements and will minimise the build up of lime scale in hard
water areas.
1. Introduction
Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have designed this product with
your enjoyment in mind. To ensure that it works to its full potential, it needs to be fitted correctly. These fitting
instructions have been created to give you all of the information you need and, if you need any further help, please
do not hesitate to give us a call on 0844 701 6273.
2. Safety Note
Please read these instruction thoroughly and retain for future use.
All products manufactured and supplied by Bristan are safe provided they are installed correctly, used correctly
and receive regular maintenance in accordance with these instructions.
These fittings need to be installed in accordance with and meet the requirements of the Water Supply (Water
Fittings) Regulations 1999 and Scottish Byelaws 2004.
Before starting any installation please consider the following:
Prior to drilling into walls, check that there are no hidden electrical
wires, cables or water supply pipes. This can be checked with the aid of
an electronic detector.
If power tools are used do not forget to:
- Wear eye protection
- Unplug equipment after use
03
To Next Page
Loading...
