How to fix no water flow in my Bristan Plumbing Product?
If your Bristan Plumbing Product has no water flow, here are a few things to check: * Ensure the water isolating valve is in the 'on' position. * The filter may be blocked. Turn off the water supply, remove the filter, and clean it. * Confirm that the power supply is on.
Why is the water temperature too hot in my Bristan smile Plumbing Product?
If the water temperature from your Bristan Plumbing Product is too hot, it could be due to: * Insufficient water flowing through the shower. Try cleaning the handset. * You may need to increase the water flow by adjusting the temperature control knob to a cooler setting. * Try reducing the power setting.
What to do if my Bristan smile Plumbing Product shower runs hot and cold?
If your Bristan Plumbing Product shower runs hot and cold during use, it may be because the water pressure is at the minimum requirement. Check the running pressure, which should be a minimum of 0.7bar. Wait until the pressure increases.
Why does the shower temperature cycle between hot and cold in my Bristan smile Plumbing Product?
The shower temperature in your Bristan Plumbing Product might be cycling between hot and cold because the temperature is set too high. This causes the thermal cut out to turn off the heating elements to reduce the water temperature. To resolve this, turn the shower temperature control anti-clockwise to reduce the water temperature.
General| Brand | Bristan |
|---|---|
| Model | smile |
| Category | Plumbing Product |
| Language | English |
Provides essential safety instructions and warnings for proper installation and use of the shower unit.
Details the power settings: Stop, Cold, Eco (Medium), and High for shower operation.
Explains the adjustable temperature control and its built-in safety feature to prevent overheating.
Information on the function and importance of the integrated Pressure Relief Device for safety.
Illustrates the various ways the water inlet pipe can be connected to the shower unit.
Details the different points and methods for routing electrical cables into the shower unit.
Step-by-step guide for removing, cleaning, and reinstalling the shower's inlet filter.
To Next Page
