What to do if my Bristan Plumbing Product is constantly dripping or leaking?
If your Bristan Plumbing Product is constantly dripping or leaking when not in use, it could be because the cartridge or valve is not fully shutting off. To resolve this, service the fitting and replace the cartridge or valve. Refer to the maintenance section on page 09.
Why is there no flow or poor flow rate from my Bristan Plumbing Product?
If your Bristan Plumbing Product has no flow or a poor flow rate, there are several potential causes: * A partially closed stop or service valve in the water supply pipework. Solution: Open the stop or service valve. * The head of water is below the minimum distance required. Solution: Refer to the Specification section for minimum pressures required. * Possible airlock or blockage in the supply pipework. Solution: Remove water supplies from the fitting and flush the system to remove any airlocks or debris. * The cartridge or valve is not opening fully. Solution: Service the fitting. Refer to the maintenance section on page 09.
How to fix a Bristan Cinnamon that does not turn on?
If your Bristan Plumbing Product does not turn on, there are a couple of things to check: 1. Ensure that the water supplies to the fitting are turned on. 2. Make sure that the stop or service valve is open. If it's closed, open it.
Guidance on correctly fitting flexible connecting pipes to avoid kinks or twists.
Instructions for the correct positioning of isolation valves for operation and servicing.
Detailed steps for fitting the push-fit connector and attaching hot/cold connectors.
Instructions for connecting flexible pipes, fitting cover cap, and securing the tap body.
Guidelines for cleaning the tap fitting, avoiding damaging products and chemicals.
Step-by-step guide to diagnose and fix leaks by disassembling and checking the cartridge.
Details the parts and labour warranty period for taps and mixers, including special finishes.
Specifies the warranty duration for mixer shower valves, with variations for finishes and registration.
Outlines the parts and labour warranty for pumps and power showers.
Covers the warranty period for electric showers and instantaneous water heaters.
Details the parts-only warranty for accessories, including variations for finishes.
States the parts-only warranty for sanitaryware, subject to proof of purchase.
General| Brand | Bristan |
|---|---|
| Model | Cinnamon |
| Material | Brass |
| Finish | Chrome |
| Number of Handles | 2 |
| Handle Type | Lever |
| Spout Type | Swivel |
| Valve Type | Ceramic Disc |
| Maximum Operating Pressure | 5.0 bar |
To Next Page