- 10 -
Hook the shoulder strap back onto the
yoke, making sure that the adjuster
strap is not twisted and that the
thread colours on the shoulder strap
match those on the adjuster strap.
Repeat from step 2 with the other
shoulder strap.
5
Put the cover back. Pull both shoulder straps forward to remove any slack. Make sure the harness
is threaded through the buckle tongues as shown above.
6
IMPORTANT -
The shoulder straps and the chest pad straps MUST be
threaded through the same pair of slots.
✔
✘
63513_BBO-604-04_pages 12/16/03, 11:56 AM10
To Next Page
Loading...
