Britax First Class Si - Removing the Newborn Insert

- 14 -
Removing the newborn Insert
Remove the buckle comfort pad by pulling it
over the buckle.
2
With one hand press in and hold the harness
release button. With your other hand below
the chest pads, pull the shoulder straps
forward as far as possible to loosen the
harness.
1
4
Pull the buckle through the newborn insert.
4
Un-fasten the studs in each side of the
newborn insert and pull the shoulder straps
clear of the slots in the newborn insert.
3
63513_BBO-604-04_pages 12/16/03, 11:56 AM14