- 18 -
Checking the position of the seat-belt buckle
If, after following the above instructions, your
seat-belt buckle looks like this the First Class Si
is NOT correctly installed and the seat-belt
may come undone. Try Alternative Routing ‘B’
shown on page 19.
If in doubt contact our Customer Service
Helpline on (01264) 386034.
If, after following the installation instructions,
and having used your body weight to tighten
the belt, your seat-belt buckle looks like this
the First Class Si should now be secure.
To check this try to pull the seat forward by
the harness. It should feel firm, not loose.
If, after following the above instructions, your
seat-belt buckle looks like this the First Class Si
should now be secure.
To check this try to pull the seat forward by
the harness. It should feel firm, not loose.
✔
✘
✔
63513_BBO-604-04_pages 12/16/03, 11:56 AM18
To Next Page
Loading...
