15
HIGHPOINT User Guide
2� Adjust the SecureGuard Webbing�
• To Shorten: Feed the webbing through the SecureGuard
adjuster and pull the end of the SecureGuard adjuster
webbing to tighten�
• To Lengthen: Feed the end of the SecureGuard adjuster
webbing through the SecureGuard adjuster and pull the
webbing to remove slack from the SecureGuard adjuster�
Then, move the SecureGuard clip to the center of the
SecureGuard webbing�
NOTE: The lower edge of the SecureGuard clip should be
level with the child’s upper thighs once the child has been
secured in the booster seat.
3� Reattach the SecureGuard Clip back into the base of the seat
by rotating the adjuster 90 degrees and inserting it into the slot�
Ensure the SecureGuard strap is not twisted�
To Next Page
Loading...
