Britax HIGHPOINT - Vehicle Head Restraints

30
Britax Child Safety, Inc.
Vehicle Head Restraints
WITH BACKREST: Proper positioning of the booster seat may
require adjusting or removing the vehicle head restraint to allow the
backrest to lie flat against the vehicle seat back� If the vehicle head
restraint cannot be adjusted or removed, a dierent seating position
or dierent booster seat should be used�
WITHOUT BACKREST: Use only as a backless booster when used
in a seating position with a vehicle head restraint� See your vehicle
owner’s manual for booster seat positioning instructions�
In some cases, the vehicle head restraint can prevent the child seat
head restraint from being raised high enough to properly adjust the
harness for the fit of your child� DO NOT force the child seat head
restraint past the vehicle head restraint� Doing so could cause the child
seat not to perform as intended� If the location of the vehicle head
restraint interferes with the child seat head restraint, raise or remove the
vehicle head restraint� If the vehicle head restraint cannot be removed,
move the child seat to the upright position or try a dierent seating
location�