14
Britax Child Safety, Inc.
SecureGuard
Britax recommends using the SecureGuard to achieve best vehicle seat
belt placement� The SecureGuard clip should hold the lap part of the
vehicle seat belt in place�
The SecureGuard clip should be adjusted to keep the lap part of the
vehicle seat belt positioned low across your child’s upper thighs� Ensure
the bottom edge of the SecureGuard clip is level with your child’s upper
thighs; however, the clip itself should not press into your child’s upper
thighs�
IMPORTANT: The lap part of the vehicle seat belt must not rest on the
child’s abdomen�
Adjusting the SecureGuard
1� Remove the SecureGuard clip�
a� Lift up the front of the base cover by removing the elastics
at the front of the base (see page 32)�
b� Locate the SecureGuard adjuster and rotate adjuster strap
90 degrees�
c� Slide the SecureGuard adjuster through the slot and pull
through the opening and away from the base�
To Next Page
Loading...
