Britax HIGHPOINT - Care and Maintenance; Cleaning Booster Seat Components

32
Britax Child Safety, Inc.
Removing Booster Covers
Booster Base Cover
1� Detach the two elastic loops from under the front of the seat
base and lift the cover up�
2� Remove the SecureGuard clip by rotating the adjuster 90
degrees and sliding the adjuster through the slot (see page
26)�
3� Detach the two elastic loops from the back of the seat base�
4� Remove the booster base cover�
Booster Backrest Cover
1� Raise headrest (see page 13)�
2� Detach the two elastic loops from the top of the backrest�
3� Detach the four elastic loops from the bottom of the backrest�
4� Remove the backrest cover�
NOTE: Be careful not to damage the foam.
IMPORTANT: Before each use, check this child seat and its components to make sure they are in
good condition and good working order�
Care and Maintenance