16
Britax Child Safety, Inc.
Cup Holders
Installing the Cup Holders (Optional)
IMPORTANT: DO NOT use cup holders with hot liquids�
1� Slide the cup holder into the booster base and press down until
a click is heard�
NOTE: The cup holders are labeled “L” and “R”, from the
position of the child occupant, and can only be installed as
indicated.
Removing the Cup Holders
1� From under the booster base, locate the tab on the bottom of
the cup holder�
2� Pull forward on the tab to disengage the cup holder, then
remove it from the booster base�
NOTE: Cup holders are dishwasher safe.
NOTE: Cup holders can be removed to allow for side by side
seating positions.
To Next Page
Loading...
