24
Britax Child Safety, Inc.
3� Route the lap part of the vehicle seat belt under the left and right
armrests and over both base belt guides�
NOTE: The shoulder part of the vehicle seat belt should be routed
under the armrest on the buckle side.
4� Verify the vehicle seat belt is not twisted and then fasten across
the child�
NOTE: The lap part of the vehicle seat belt should rest low on the
child’s upper thighs.
5� Route the lap part of the vehicle seat belt through the
SecureGuard clip�
NOTE: The lap part of the vehicle seat belt should rest low on
the child’s upper thighs.
6� Remove slack from the vehicle seat belt�
NOTE: Proper positioning is achieved when the shoulder belt
lies across the center of the child’s chest and is positioned at or
just above the child’s shoulder.
7� Review Checklist on page 26 to ensure all steps have been
completed fully�
To Next Page
Loading...
