Britax MINI - Installing & Removing the Baby Capsule Adaptors

33 32
Installing & Removing the Baby Capsule Adaptors
Engage the brake,
remove seat from
stroller.
Align the
adaptors with
the stroller frame
sockets and push
down until it locks.
WARNINGS:
THE BABY CAPSULE ADAPTORS MUST BE ATTACHED TO THE STROLLER FRAME BEFORE
INSTALLING THE BABY CAPSULE.
Click & Go™ Baby Capsule Adaptors Mini
B. To ensure the
baby capsule
is locked into
the stroller
frame correctly,
pull the baby
capsule up and
check.
A. Engage the
brake. Pull and
hold the release
lever on the
back of the baby
capsule and lift
to remove from
stroller.
A. Align the baby
capsule with the
adaptors.
Press down rmly
until you hear a
’click’.
Note: The baby
capsule must be
on parent facing
mode (facing the
stroller handlebar).
PLEASE NOTE: These instructions are for
installing and removing the Britax baby
capsule on the Britax Mini stroller only.
For installing and proper use of the baby
capsule in the car, please follow the
instructions manual provided with the
baby capsule. Ensure the baby is secured
in the baby capsule with the harness at all
times, refer to the baby capsule instruction
manual regarding placing and securing
your baby in the baby capsule.
For attaching or removing competitor
baby capsules refer to instruction manual
provided with the baby capsule.
Baby Capsule
CAUTION
A B
To remove the
adaptors, push
the side button
up and pull at
the same time.
Installing the Britax
Baby Capsule
Removing the Britax
Baby Capsule
Stroller Accessories
(Sold Separately)
Stroller Accessories
(Sold Separately)