39 38
Care & Maintenance
General Maintenance & Repair
• Ensure all safety devices, locks, harness, and
brakes are in working order.
• Ensure all joints and folding areas move
freely as intended.
• Should any moving or locking parts become
stiff or hard to operate, ensure these are free
from tension, or dirt by wiping clean with
a damp cloth to remove any dirt, sand, or
debris. Allow to dry and lightly spray with a
dry silicon lubricant. Please carefully read
the lubricant instructions prior to use.
• Ensure wheels are regularly cleaned with a
damp cloth by removing dirt, sand, or debris.
Allow to dry and lightly spray the wheel pivot
pin with a dry silicon lubricant to keep the
wheels moving smoothly. Please carefully
read the lubricant instructions prior to use.
• Regularly spray all moving parts with a dry
silicon lubricant. Please carefully read the
lubricant instructions prior to use.
• Ensure all connecting rivets and screws are
secure.
Tighten if required.
• If there are compression marks on the
tyres, use a domestic hair dryer to gently
warm (DO NOT OVERHEAT) the tyre and the
compression marks should slowly disappear.
• To maintain the safety and longevity of the
stroller, seek prompt repairs or replacement
for bent, torn, worn, or broken parts. Do not
continue to use the stroller if unsafe.
• All repairs should only be carried out by
an authorised Britax repairer. Only Britax
replacement parts should be used with
the stroller. It may be unsafe to use parts
supplied from another manufacturer.
General Tips
Do not store the stroller in your car for
prolonged periods of time during summer
as it may lead to damage to some of the
plastics components.
Do not leave the stroller in direct sunlight for
extended periods of time, as colours of some
fabrics may fade, and tyres may deteriorate.
Do not fold or store the stroller if damp or
wet, as fabric may develop mould or mildew.
Always store the stroller inside in a dry, well-
ventilated area.
Do not place heavy objects on top of the
stroller as it may alter the shape.
Should you have any further questions on
care & maintenance of the stroller, please
contact our Consumer Service Team at:
aunz-support@britax.com
Care & Maintenance
Cleaning
Fabrics
• Removable fabrics may be cleaned
using lukewarm water and soap or mild
detergent. Rinse thoroughly and allow to
dry away from direct sunlight.
• Non-removable fabrics can be spot
cleaned using a damp sponge and soap
or mild detergent. Allow to dry completely
before re-use or storage.
• Never use bleach, or abrasive cleaning
products.
• DO NOT iron or dry clean.
NOTE: DO NOT place any of the stroller
fabrics in the dryer. Allow to dry naturally,
away from direct sunlight.
Frame
• Remove dirt and dust away from any
moving mechanism.
• Clean frame with a soft damp cloth and
soap or mild detergent and allow to dry
thoroughly.
• DO NOT use abrasive cleaning products
as it may cause stains, discolouration or
scratches to the frame.
• DO NOT soak or submerge frame in water.
• DO NOT remove, dismantle or alter any part
of the stroller mechanism or brakes.
Leatherette
• Spot clean with a damp soft cloth.
• DO NOT use a dripping wet cloth or wet the
leatherette excessively.
Wheels
• Remove wheels from stroller.
• Clean with damp cloth and soap or mild
detergent. Use brush to remove dirt and
mud build up around the tyre. Allow to dry
thoroughly before placing wheels back on
the frame.
• If necessary lubricate wheel shaft with a
small amount of lubricant before placing
into the stroller.
• Ensure the stroller is cleaned thoroughly
after using it on the beach as sand and salt
can damage stroller mechanism, wheel
assembly, causing premature wear and
corrosion.
PLEASE NOTE:
Our product warranty does not cover any
rust to the rivets or screws, if you are caught
in the rain or at the beach always thoroughly
dry the frame to avoid any rust damage.
To Next Page
Loading...
