13 12
Stroller Assembly
Opening the Frame
IMPORTANT NOTES:
PLEASE REFER TO PAGE 6 FOR
SMART LIFTING TECHNIQUES.
• Release the frame lock with due care and
open the frame.
• When opening the stroller, be aware of the
danger of being injured by moving parts
and locking devices during the process.
Keep all hands and limbs clear of these
parts.
• There is potential for ngers or parts of the
body to injured when the stroller is being
unfolded, due care should be exercised.
• Keep children clear of the stroller when
unfolding the stroller.
• Open the stroller slowly and be careful
where you place your hands. Keeping your
hands on the handle is the best way to
unfold the stroller.
Stroller Assembly
A. Slide the
front wheel
mounting
pins into the
housing on
the frame
until they lock
into place.
Please ensure
it is locked.
B. To remove the
rear wheels,
press and hold
the release
button in the
centre of the
wheel and pull
away from the
wheel housing.
B.
To remove the
front wheels,
push front
wheel release
button and
pull the wheel
out of the
housing.
A
B
A
A
B
B
Attaching & Removing the Rear Wheels Attaching & Removing the Front Wheels
A. Hold in the rear
wheel release
button in the
centre of the
wheel and slide
the mounting pin
into the housing
on the rear axle.
Please ensure It
is locked.
Release the
frame lock inside
the frame and
slowly pull the
handlebar up to
open.
Lift the
handlebar
upwards until
the frame is
fully open and
locked.
CAUTION
To Next Page
Loading...
