35
Lap-Shoulder Belt Installation
1. Secure your child in the child restraint
before installing in the vehicle. See
page 41.
2. Place the child restraint rear facing on
the vehicle seat.
3. Pull the vehicle belt out and
route the lap portion under
the child restraint belt guides
and buckle
NOTE: Verify that the vehicle
belt is not twisted.
IMPORTANT: Check your vehicle owner’s manual to determine how
to lock your vehicle belt system.
‐ If you cannot lock your vehicle belt you must use a locking clip. Locking
clips are available from Britax at 1-888-427-4829 or 1-704-409-1699.
3
1
To Next Page
Loading...
