EasyManua.ls Logo

Britax Willow Brook - Safety Information

Britax Willow Brook
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Read these instructions before use of the child restraint.
Follow all instructions on this child restraint and in the written
instructions located in the base storage compartment. Keep the
instructions with the restraint for future use.
Use only in a rear-facing position when using it in a vehicle.
Use only with children who weigh between 4 and 30 pounds (1.8
and 13.6 kg) and whose height is 32” (81.3 cm) or less.
Snugly adjust the belts provided with this child restraint around
your child.
Secure this child restraint with the vehicle’s child restraint
anchorage system if available or with a vehicle belt. Using both
methods is not approved and may cause the child seat not to
perform as intended.
A snug strap should not allow any slack. You should not be able to
pinch excess.
Register your child restraint with the manufacturer.
This child seat can only be used in the following classes of
vehicles: multi-purpose passenger vehicles, passenger cars, or
trucks.
Safety Information
WARNING!



Table of Contents

Related product manuals