43
7. Buckle the harness.
NOTE: After inserting each buckle
tongue, a click helps conrm the
connection is secure.
NOTE: Always pull on the harness to
ensure it is properly connected.
8. Check for proper harness height in
the closest position below the
shoulders and pull any excess slack
up to the child’s shoulder area
before tightening.
9. Slowly pull the adjuster strap to
tighten the harness around the child.
NOTE: Snugly adjust the belts provided
with this child restraint around your
child. A snug strap should not allow
any slack. It lies in a relatively straight
line without sagging. It does not press
on the child’s esh or push the child’s
body into an unnatural position. You
should not be able to pinch excess.
8
7
9
To Next Page
Loading...
