To Next PageTo Next Page
Need help?Do you have a question about the Brivis B061526 and is the answer not in the manual?
General| Brand | Brivis |
|---|---|
| Model | B061526 |
| Category | Network Router |
| Language | English |
Important warnings about potential hazards during installation and operation.
Notes providing additional important information for installation and use.
List of supplied parts and initial checks before starting installation.
Tools and materials required from the user for installation.
Step-by-step guide for wiring the control to the indoor unit using the provided loom.
Instructions on how to detach the control's bottom cover for installation.
Procedure for correctly inserting the lithium battery into the control unit.
Steps for fixing the control to the wall and crucial installation considerations.
Visual representation of the wiring connections between the control and indoor unit.
Defines the operating temperature and humidity range for the control.
Explanation of all icons and indicators shown on the controller's LCD screen.
Description of each physical button on the wired programmable controller.
Guide to setting the controller's internal clock and day of the week.
How to turn the air conditioning system on and off using the controller.
Instructions for selecting cooling, heating, fan, or dry modes.
How to set the desired temperature for the room.
Procedure for changing the fan speed settings.
Option to choose between indoor unit or controller for temperature sensing.
How to lock or unlock all buttons on the controller to prevent unintended changes.
Instructions to turn the audible feedback for button presses on or off.
Method to change the temperature display between Celsius and Fahrenheit.
How to operate the horizontal louvre swing function.
Instructions for adjusting vertical louvre direction and automatic swing.
Introduction to the weekly timer for setting daily operating schedules.
How to program the system to turn ON at a specific time.
How to program the system to turn OFF at a specific time.
How to program both start and stop times for automatic operation.
Detailed steps to set either an ON or an OFF timer for the system.
Detailed steps to set both an ON and an OFF timer for the system.
Initiating the weekly timer programming sequence.
Selecting the specific day for which timer settings are being configured.
Configuring the start time for the first timer period of the selected day.
Configuring the stop time for the first timer period of the selected day.
How to enable the weekly timer function on the controller.
How to disable the weekly timer function.
How to temporarily turn off the system during scheduled timer operation.
How to set a day where timer operations are suspended.
How to delay the programmed ON or OFF timer by 1 or 2 hours.
Efficiently copy timer settings from one day to another.
List of fault codes displayed by the system and their meanings.
