Brivis contour Service Manual

Service Manual 32 – Contour 3 Series, Profiler & Advance – Approved Issue 5 Printed 2/13/2014 11:50:17 AM
35
Networker Installer Parameters
N-C3 Zoning Parameters
Parameter ID Number
and Value
Parameter Description
Parameter Value
Settings
n01 ID00:1
Networker Address or ID Number Master = 1 or Slave = 2
n01 ID01:1
Refrig Common Zone, Unit Number Refrig/Heater ID No.
n01 ID02:0
Refrig Common Zone - Networker Temp Sense
Networker ID No.
n01 ID03:0
Refrig Zone A, Unit Number Refrig/Heater ID No.
n01 ID04:0
Refrig Zone A, Relay Number
Relay No. 1 to 4
n01 ID05:0
Refrig Zone A - Networker Temp Sense
Networker ID No.
n01 ID06:0
Refrig Zone B, Unit Number Refrig/Heater ID No.
n01 ID07:0
Refrig Zone B, Relay Number
Relay No. 1 to 4
n01 ID08:0
Refr
ig Zone B
-
Networker Temp Sense
Networker ID No.
n01 ID09:0
Refrig Zone C, Unit Number Refrig/Heater ID No.
n01 ID10:0
Refrig Zone C, Relay Number
Relay No. 1 to 4
n01 ID11:0
Refrig Zone C - Networker Temp Sense
Networker ID No.
n01 ID12:0
Refrig Zone D, Unit Number Refrig/Heater ID No.
n01 ID13:0
Refrig Zone D, Relay Number
Relay No. 1 to 4
n01 ID14:0
Refrig Zone D - Networker Temp Sense
Networker ID No.
n01 ID15:1
Heater Common Zone, Unit Number Heater ID No.
n01 ID16:0
Heate
r Common Zone
-
Networker Temp Sense
Networker ID No.
n01 ID17:0
Heater Zone A, Unit Number Heater ID No.
n01 ID18:0
Heater Zone A, Relay Number
Relay No. 1 to 4
n01 ID19:0
Heater Zone A - Networker Temp Sense
Networker ID No.
n01 ID20:0
Heater Zone B, Unit Number Heater ID No.
n01 ID21:0
Heater Zone B, Relay Number
Relay No. 1 to 4
n01 ID22:0
Heater Zone B - Networker Temp Sense
Networker ID No.
n01 ID23:0
Heater Zone C, Unit Number Heater ID No.
n01 ID24:0
Heater Zone C, Relay Num
ber
Relay No. 1 to 4
n01 ID25:0
Heater Zone C
-
Networker Temp Sense
Networker ID No.
n01 ID26:0
Heater Zone D, Unit Number Heater ID No.
n01 ID27:0
Heater Zone D, Relay Number
Relay No. 1 to 4
n01 ID28:0
Heater Zone D - Networker Temp Sense
Networker ID No.
n01 ID29:1
Evap Common Zone, Unit Number Evap ID No.
n01 ID30:0
Evap Common Zone - Networker Temp Sense
Networker ID No.
n01 ID31:0
Evap Zone A, Unit Number Evap ID No.
n01 ID32:0
Not Used
Not Used
n01 ID33:0
Evap Zone A
-
Networker Temp Sense
Networker ID No.
n01 ID34:0
Evap Zone B, Unit Number Evap ID No.
n01 ID35:0
Not Used
Not Used
n01 ID36:0
Evap Zone B - Networker Temp Sense
Networker ID No.
n01 ID37:0
Evap Zone C, Unit Number Evap ID No.
n01 ID38:0
Not
Used
Not Used
n01 ID39:0
Evap Zone C - Networker Temp Sense
Networker ID No.
n01 ID40:0
Evap Zone D, Unit Number Evap ID No.
n01 ID41:0
Not Used
Not Used
n01 ID42:0
Evap Zone D
-
Networker Temp Sense
Networker ID No.
n01 ID43:0
Heating OFF cycle Circulation Fan Operation
0 = OFF or 1 = ON

Brivis contour Specifications

General

Brand	Brivis
Model	contour
Category	Freezer
Language	English