Rinnai 16 Ducted Gas Heater OM
7.3 Skip a Programmed Heating Period
Skip the current period settings and operate at the next programmed period as follows:
a. Press Key 2 (Adv Period).
b. Key 2 (Advance Period) now offers a Cancel Adv Period function. Press Key 2 to return to the preset AUTO
program.
7.4
Permanently Change the AUTO Mode Settings
If the preset AUTO program settings do not provide the desired level of comfort, the settings can be
changed to suit requirements, as follows:
a. Turn the networker off.
b. Press the mode button
until Heating displays.
c. Press the PROG button. The word Program and the digital clock begin flashing.
Time Period Selection
d. Press Key 1 (day) and select either the weekdays or the weekend.
e. Press Key 2 (period) to select the required time period.
Time Settings
f. Press Key 3 (Time/Temp) to select Time. The digital clock flashes.
g. Turn the rotary dial to adjust the time as desired for the period selected.
Temperature Settings
h. Press Key 3 (Time/Temp) to select Temp. The temperature flashes.
i. Turn the rotary dial to adjust the temperature as desired for the period selected.
Note: Selecting a Set Temperature of (- -) turns the heater off for that period. If zone features are installed, zone keys 4 and 5 are
active and zones can be selected for that period.
j. Repeat from Step d until all time periods are set as desired.
k. Press the PROG button to save the settings.
l. To review the settings, press PROG. The new settings display.
m. Press PROG to close the review.
To Next Page
Loading...
Need help?
General
