Rinnai 14 Ducted Gas Heater OM
6. User Settings
Accessing the user settings allows you to customise certain features on the NC-6 display and modify “Auto
Program” functions; these include:
• Clock displayed in either 12hr or 24hr time
• Temperature displayed in either °C or °F
• Day grouping (3 options) when in “AUTO” mode
• Enable or disable the “Pre Sleep” option
6.1
NC-6 User Settings in Heating Operation Display
To access and change the user settings at the NC-6 Master Controller:
1. Press Key “5” and release
2. Press and hold Key “4” until the following message begins to scroll across the top of the screen - “User setting
mode”
3. You now have access to the user settings. Please refer to Table 3. User Setting Options on page 14 and
change as required
4. Press the On/Off button to save and exit User Settings
Table 3. User Setting Options
User Input Option
Key “1” Changes the day grouping to one of the following:
- Individual days: Selected when each day flashes individually and
sequentially
- Week day and weekend Block: Selected when Mon to Fri flash and the
Sat-Sun flash
- All week days: Selected as one group when Mon to Sun are all displayed
at once
Key “2”. Enables and disables the “Pre Sleep” option
Key “3” Displays the temperature in either ºC or ºF
Key “4” Displays the time in either 12hr or 24hr format
To Next Page
Loading...
Need help?
General
